[ANIMATION_0]
INPUT = HANDBRAKE       
FILE = fam.ksanim          
TIME = 2.0                 
INPUT_AS_PROGRESS = 0       
LOOP_WHILE_ACTIVE = 0       
LOOP_KEEP_UNTIL_DONE = 1    
TICK_TOCK_MODE = 0 
    
[ANIMATION_1]
INPUT = HANDBRAKE       
FILE = frein_a_main.ksanim          
TIME = 2.0                 
INPUT_AS_PROGRESS = 0       
LOOP_WHILE_ACTIVE = 0       
LOOP_KEEP_UNTIL_DONE = 1    
TICK_TOCK_MODE = 0          


[EXHAUST_FLAMES]
ANTILAG=1 ; turbo antilag, i havent tested this yet
ANTILAG_DELAY=0.0 ; how long after antilag trigger do flames start, in seconds
ANTILAG_INTENSITY=40 ; flame size
ANTILAG_INTERVAL_MAX=9000
ANTILAG_INTERVAL_MIN=2000
ANTILAG_TURBO_THRESHOLD=0.5
DAMAGE=0 ; engine damage? idk
DAMAGE_DURATION=0.00
DAMAGE_INTENSITY=0
DAMAGE_PROBABILITY=0
DISCHARGE=1 ; lifting off the throttle
DI3CHARGE_CHARGE_TIME=0.001 ; how long you have to press the throttle to "charge" the flames
DISCHARGE_DELAY=0.1 ; delay after throttle lift
DISCHARGE_DURATION=3.1 ; length of flame shooting, in seconds
DISCHARGE_PROBABILITY=1; chance of flame shoot on lift, 1 is guaranteed, 0 is never
DISCHARGE_INTENSITY=5; flame size
DISCHARGE_RPM_THRESHOLD_MAX=9000 ; self explanatory
DISCHARGE_RPM_THRESHOLD_MIN=2000 ; self explanatory
DISCHARGE_WATER_TEMPERATURE_THRESHOLD=70
FLAT_SHIFT=1 ; on upshift
FLAT_SHIFT_COOLDOWN=0 ; after upshift
FLAT_SHIFT_DURATION=5 ; length of flame shooting, in seconds
FLAT_SHIFT_GAS_THRESHOLD=80 ; how much gas needs to be pressed on upshift for flame, 100 is wide open
FLAT_SHIFT_INTENSITY=5 ; flame size
FLAT_SHIFT_PROBABILITY=1 ; chance of flame shoot on upshift
FLAT_SHIFT_RPM_THRESHOLD=8500
LIMITER=1 ; on hitting the limiter
LIMITER_DELAY=0 ; delay, in seconds
LIMITER_INTENSITY=5 ; flame size
LIMITER_RPM_THRESHOLD=2000 ; limiter flames will not shoot below this rpm
